Achieving a good fit helps protect against leaks and ensure your baby is comfortable.
If you are having trouble fitting your nappies, are getting leaks or just don't know where to start, send us a picture of your cloth nappy on and we will help to guide you in the right direction!
Step 01 - Check size
Step 02 - Position
Check where the nappy is sitting. Modern reusable nappies tend to sit lower than disposable nappies. Just above the bottom and just below the belly button. The front and back should be the same height.
Step 03 - Tuck fold upwards
If you are using a osfm, tuck any excess material upwards with your fingers.
Step 04 - Tuck excess material away
Tuck excess material inwards and upwards with you fingers.
Step 05 - Pull leg elastics into the undie line
Make sure you pull legs elastics right into the undie line. This is an important step to protect against leaks and ensure bub is comfy.
Step 06 - Tummy not too tight
Make sure there is enough room for the tummy when sitting up. You should be able to fit 2-3 fingers in-between the nappy and tummy. A little gaping is ok.